Installing TCMS V2 Viewer For Windows 7
The Windows 7 operating system has a more complex computer security system compared to its predecessors Windows XP, reducing the risk of damage caused by viruses, spyware and other malware. With the new security features, there are more steps to configure before you can use the TCMS V2 Viewer. Below are the instructions and steps to assist you through the TCMS V2 Viewer configuration:
A) To add an Inbound Rule for TCMS V2 Viewer into the Windows Firewall.
B) To enable all the Internet Information Services (IIS) features.
C) To set the application pool to Classic .NET AppPool.
D) To enable the ASP.Net Impersonation.
E) To Allow Full Permission and Control For All Users
F) Install the TCMS V2 Viewer.
G) Check the computer’s IP Address.
H) Run the TCMS V2 Viewer.
A)To add an Inbound Rule for TCMS V2 Viewer into the Windows Firewall:
1. Go to Control Panel and select Windows Firewall.
2. At Windows Firewall, click on Advanced settings.
3. Click on Inbound Rules and click New Rule at the Actions tab.
4. At the Rule Type, select Port and click Next.
5. Specify the local ports for TCP and UDP. Set the port value as 80 for both TCP and UDP.
6. At the next page, select Allow the connection and click Next.
7. Please tick on the checkboxes for Domain, Private, and Public. After that, click Next.
8. Insert the Name as TCMS V2 Viewer and click Finish.
B)To enable all the Internet Information Services (IIS) features
1.Go to Control Panel and select Programs and Features.
2.Click on Turn Windows features on or off.
3.Look for the folder Internet Information Services and tick on the checkbox. Make sure that you ticked all the subfolders inside the Internet Information Services option.
4.Click OK to proceed to installation.
C)To set the application pool to Classic .NET AppPool.
1.Go to Control Panel and select Administrative Tools.
2.Double click the Internet Information Services (IIS) Manager.
3.At the Connections panel on the left, click Sites > Default Web Site > right click TCMSv2Viewer > Manage Application > Advance Settings.
4.Change the Application Pool to Classic .NET AppPool and click OK.
5.At the Connections panel on the left, click Default Web Site, go to the Actions panel on the left and click Restart.
D)To enable the ASP.NET Impersonation.
1.Go to Control Panel and select Administrative Tools.
2.Double click the Internet Information Services (IIS) Manager
3.At the Connections panel on the left, click Sites > Default Web Site > double click on Authentications.
4.Change the ASP.NET Impersonation to Enabled.
E)To Allow Full Permission and Control For All Users
1.Go to C:\Program Files \FingerTec Worldwide
2.Right click at the TCMSv2 folder, and select Properties.
3.Click on the Security Tab and click Edit.
4.Click Add to add new Users or Groups.
5.At the Enter the object names to select columns, insert the name as "Everyone". Click OK to proceed.
6.Click on the "Everyone" group and tick the Full control checkbox at the Allow column.
7.Click Apply and OK to exit.
F)Install the TCMS V2 Viewer
1.You can download the TCMS V2 Viewer Software at: http://www.fingertec.com/download.php?name=tcmsv2viewer
2.Extract the downloaded file and double click on the installer to prompt the installation.
G)To Check Your Computer’s IP Address
1.Go to Control Panel and select Network and Sharing Center.
2.Click Change adapter settings and the window will display all your LAN and WiFi connection adapters.
3.Right click at your network adapter and select Status.
4.At the Status window, click Details.
5.Your computer’s IP Address will be displayed.
H)To Run The TCMS V2 Viewer
1.Start up an Internet Browser and insert the following address: http://(your computer’s IP Address)/tcmsv2viewer
For example please refer to the above screenshot.
2.The TCMS V2 Viewer will prompt you to enter the FingerTec TCMS V2 installation folder path. If you did not change the installation path while installing the TCMS V2 software, just click Submit to proceed.
3.The next screen will require you to log in to the TCMS V2 Viewer. Insert your user ID and password as per state in the TCMS V2 software to log into the TCMS V2 Viewer.
A) To add an Inbound Rule for TCMS V2 Viewer into the Windows Firewall.
B) To enable all the Internet Information Services (IIS) features.
C) To set the application pool to Classic .NET AppPool.
D) To enable the ASP.Net Impersonation.
E) To Allow Full Permission and Control For All Users
F) Install the TCMS V2 Viewer.
G) Check the computer’s IP Address.
H) Run the TCMS V2 Viewer.
A)To add an Inbound Rule for TCMS V2 Viewer into the Windows Firewall:
1. Go to Control Panel and select Windows Firewall.
2. At Windows Firewall, click on Advanced settings.
3. Click on Inbound Rules and click New Rule at the Actions tab.
4. At the Rule Type, select Port and click Next.
5. Specify the local ports for TCP and UDP. Set the port value as 80 for both TCP and UDP.
6. At the next page, select Allow the connection and click Next.
7. Please tick on the checkboxes for Domain, Private, and Public. After that, click Next.
8. Insert the Name as TCMS V2 Viewer and click Finish.
B)To enable all the Internet Information Services (IIS) features
1.Go to Control Panel and select Programs and Features.
2.Click on Turn Windows features on or off.
3.Look for the folder Internet Information Services and tick on the checkbox. Make sure that you ticked all the subfolders inside the Internet Information Services option.
4.Click OK to proceed to installation.
C)To set the application pool to Classic .NET AppPool.
1.Go to Control Panel and select Administrative Tools.
2.Double click the Internet Information Services (IIS) Manager.
3.At the Connections panel on the left, click Sites > Default Web Site > right click TCMSv2Viewer > Manage Application > Advance Settings.
4.Change the Application Pool to Classic .NET AppPool and click OK.
5.At the Connections panel on the left, click Default Web Site, go to the Actions panel on the left and click Restart.
D)To enable the ASP.NET Impersonation.
1.Go to Control Panel and select Administrative Tools.
2.Double click the Internet Information Services (IIS) Manager
3.At the Connections panel on the left, click Sites > Default Web Site > double click on Authentications.
4.Change the ASP.NET Impersonation to Enabled.
E)To Allow Full Permission and Control For All Users
1.Go to C:\Program Files \FingerTec Worldwide
2.Right click at the TCMSv2 folder, and select Properties.
3.Click on the Security Tab and click Edit.
4.Click Add to add new Users or Groups.
5.At the Enter the object names to select columns, insert the name as "Everyone". Click OK to proceed.
6.Click on the "Everyone" group and tick the Full control checkbox at the Allow column.
7.Click Apply and OK to exit.
F)Install the TCMS V2 Viewer
1.You can download the TCMS V2 Viewer Software at: http://www.fingertec.com/download.php?name=tcmsv2viewer
2.Extract the downloaded file and double click on the installer to prompt the installation.
G)To Check Your Computer’s IP Address
1.Go to Control Panel and select Network and Sharing Center.
3.Right click at your network adapter and select Status.
4.At the Status window, click Details.
5.Your computer’s IP Address will be displayed.
H)To Run The TCMS V2 Viewer
1.Start up an Internet Browser and insert the following address: http://(your computer’s IP Address)/tcmsv2viewer
For example please refer to the above screenshot.
2.The TCMS V2 Viewer will prompt you to enter the FingerTec TCMS V2 installation folder path. If you did not change the installation path while installing the TCMS V2 software, just click Submit to proceed.
3.The next screen will require you to log in to the TCMS V2 Viewer. Insert your user ID and password as per state in the TCMS V2 software to log into the TCMS V2 Viewer.
Initiated & Written by: Vincent
Comments
Post a Comment